A crazy comfortable sleeve in a small armhole.

I traced the weird thing I draped yesterday and cut a new sleeve from it. That’s one weird looking sleeve pattern:
crazy comfortable sleeve in small armhole
With the sideseams closed it is distorted:
crazy comfortable sleeve in small armhole

This is because I matched the points where the ends of the sleeve cap should meet each other, at the underarm. And sleeve seams are perpendicular to the vertical centre line running down from High Point (which is no longer the highest point in my sleeve cap). Width at biceps is 35 cm, at elbow 30 cm.

(I’ll have to do second trial after this one with horizontal lines running horizontal. Letting the guide line around the biceps meet itself at the seam. Or change the direction from the central vertical line, based on where the sleeve cap edges now meet. But first run this trial.)

Into the bodice and onto the mannequin. It fits into the armhole like a glove. It’s nice not having to ease in extra fabric. Still using lots of pins and sewing over them slowly.
crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole
crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole
crazy comfortable sleeve in small armhole

On me:
crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole

Lots of crumpled fabric in the armpit. Uncomfortable. But very easy to lift my arm. The ease of wearing is amazing.

Front shows vertical line running down from High Point (shoulder) to the front. This sleeve is rotating around my arm:

Untitled

I pin away the extra fabric at the arm pit and mark where the biceps guide line now is. Also where the sleeve thinks the vertical line from High Point should run, where it to run straight down instead of coming to the front.

Picture of the sleeve cap with the pinned fabric, the new vertical line coming in diagonally and my biceps guide line which is half moon shaped. Crazy sleeve.

crazy comfortable sleeve in small armhole

Opening it up again and drafting a new cap sleeve based on the pinning. Take away fabric in the left “mouse ear”, the cap part that meets the arm hole at the front:

crazy comfortable sleeve in small armhole

I keep the rest the same. There’s the vertical guide line from High Point (HP) at a diagonal angle.

Trying to match the seam points of the sleeve cap for sewing the side seam:
crazy comfortable sleeve in small armhole

This will be sleeve one (1), based on the pinnings from the previous fit. Throwing grain and common sense into the wind.

I’ll make another one (2) based on the draft from the start but now with new sideseams based on how the new vertical line running from the Highest Point runs:

crazy comfortable sleeve in small armhole

Sleeve 2: I’ve cut fabric away at the left part of the sleeve, adding it to the right. So width of sleeve is 35 cm at (strange half moon shaped) biceps guide line and 30 cm at elbow guide line. At a right angle to the vertical guide line from HP. If this fits at all this pattern should be redrawn on a new piece of cloth, obeying the grain of the fabric.

Fitting:

Sleeve 2, it’s on my right:
crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole

Sleeve 1, based on previous fit, it’s on my left:
crazy comfortable sleeve in small armhole
crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole
crazy comfortable sleeve in small armhole

Crazy amount of movement possible! It doesn’t drag up the shirt. I like it!

Fitting conclusions:
Sleeve 2 sits awful. Lots of fabric in my arm pit yet still there’s tightness there. My wrist doesn’t level out.
Sleeve 1, distorted as it may be, actually sits really nice. So much movement possible!
Still a few tweaks needed though. (is there more ease because it’s a bit on the bias?)

I’ll cut a new sleeve, on the grain, and put it in the bodice of my fashion fabric shirt. Just cleaning up the lines a bit, having high point and its line in check with grain.
The little tweaks I had to do where in the sleeve cap (just a little less drama in the wave at the front and just a little less flair near the end point back). They cause the perimeter of the sleeve cap to be the exact dimension of the arm hole. 20 cm from front to High Point, 21,6 cm from High Point to back.
This fills me with excitement! This sleeve will fit this arm hole perfectly. Have I drafted a sleeve that, while looking ridiculous, might work?

I’m sewing up my new version into the fashion shirt. (My muslin has been so tortured that it won’t hold another sleeve.)

Premature conclusions:
1. I may have DRAPED a sleeve, not drafted on. This method may work for me.
2. I may have forced myself into this ridiculous need because my arm hole is a bit weird (too tight).

Last fit, on the fashion fabric: nice. I can rotate my arm all around without distorting the bodice fabric.

crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole
crazy comfortable sleeve in small armhole

Needs less width on the biceps. I can live with a sleeve like this and be seen in public. I’m sure sewists will cringe when they see how my seam rotates around the sleeve.

Ideas for next time: lower the arm hole at the underside with 0,5 cm. Also 0,5 cm more inward at the front. I need a little more space to tuck all the sleeve folds away.

Last play for the day: just a little more cutting and pasting at that ridiculous shape. Try and put it into a grain grid.
3 versions of the same sleeve.
1. the sleeve I found, with the rotating sleeve seam.
2. the same but straight on the grain. Versie “A”
3. version “B” that has everything transferred onto a proper grain grid.

The found pattern, crazy and comfortable:
crazy sleeve pattern with maximum wearing comfort

Version A = previous version but cut on grain:
crazy comfortable sleeve in small armhole

Version B, trying to match the side seams in length. Having som sort of straight line going from sleeve cap to wrist; cleaning up more lines:

crazy comfortable sleeve in small armholecrazy comfortable sleeve in small armhole
crazy comfortable sleeve in small armhole

end result version B::
crazy comfortable sleeve in small armhole

What do yo know, version B doesn’t look that unlike a conventional sleeve pattern after all. A sleeve block with a fairly squarish sleeve cap. (Back is left, Front is at the right of the picture).

Will have to sew these three up and try them for (final) fit. And then dare to sport crazy sleeves on my fabric shirt.

 

 

some residual notes in dutch for me:
3 versies:
1- m’n gevonden vorm. Met verdraaide achternaad. “versie krulletje”
2. deze vorm maar dan recht op de grain met z’n naad en de voornaad reechtgemaat van pols naar oksel. Wat weggeknipt is is aan de zijkant/andere naad erbij geleged en een beetje opgeschoond en ervoor gezorgd dat beide naden 59 cm lang zijn, net als de rechtgeknipte naad. “versie A”
3 “versie B” heeft de HP-polslijn recht op de grain liggen en een grid dat de grain volgt. Het voorpunt v d oksel is recht naar beneden/de pols geknipt en aan de achternaad is ruimte bijgemaakt zodat de ellebeoog 30 cm breedte krijgt en de pols 25 cm. Dit is een papieren oplossing waarvan je nog maar moet zien of het in 3D mooi wordt.

Well fitting sleeves that allow for movement: angle of set in.

I cut the self drafted sleeves and put them into the bodice. Looks alright….ish. We’re only looking at the upper part: shoulders and sleeve cap. Shoulder seam length seems ok. (the neck line still has 2 cm seam allowance so … Continue reading

Self drafted pattern for a blouse, with close fitting arm hole and two sleeves, one of them oblong.

A few muslins further and now I’ve got one that works and that I’d actually call a pattern:

Untitled
sleeve sleeve cap fitting arm hole

I’ve been playing with sleeves a bit.
I’ve drafted and fitted on that I’m going to use. It’s on the left arm hole of this muslin. It has a biceps width of 35 cm and a sleeve cap matching the armhole exactly at 42,3 cm. It has little gussets at the sides.

On the right shoulder is an oblong sleeve. Just a straight piece of cloth, 42,3 cm in width and some 25 cm high. I wanted to learn how much arm movement it gives. I’ve been reading and rereading Ikatbag’s explanation of sleeves and I wanted to experience it.

Just a rectangle sewn into arm hole:

sleeve sleeve cap fitting arm hole
sleeve sleeve cap fitting arm hole
sleeve sleeve cap fitting arm hole

sleeve sleeve cap fitting arm hole
Excellent movement! Nice flair…

One day I’d like to take this sleeve (cap) and play with it. See if I can eliminate the flair, reduce the bulk at the underarm but still keep most of that nice room for movement. But not today. (I did start. I sewed some lines into the sleeve, as it was still attached, and see how that influenced fit. And I started to read up on medieval smocks and skirtles. But really, I should sew a blouse now.)

This is the sleeve I’ve drafted. It sits nice. But in unwashed cotton it’s still a bit restrictive. I’m hoping it will be alright in the lighter fashion fabric. If not it’ll be a learning experience.
Muslin looks nice though. See how close to the body the arm hole is. It’s not uncomfortable at all!
And it gives better movement than any other sleeve I’ve made before, in any of my grey blouses.
sleeve sleeve cap fitting arm hole
sleeve sleeve cap fitting arm hole
sleeve sleeve cap fitting arm hole

Here’s the pattern of this sleeve cap, with the dark thread indicating the sleeve cap but without gusset flares at both ends:
sleeve sleeve cap fitting arm hole

I also drafted front panel facings; a collar and a collar stand and plackets for the sleeves.

Now I’m ready to transfer markings to fashion fabric I think…

This is the fabric:

Untitled

Starting on a Knip Blouse April 2016

Knip Magazine looks innovated. The patternpaper is more sturdy, instructions are no longer staccato but in full sentences. With periods. What luxury!

I bought the April 2016 edition which is about vintage looks. I want to make a blouse with a standing collar and a side darts from it, blouse nr 23:

But first a muslin. I hope to transform this pattern into a pattern I can use and reuse again.

These are the steps I took:

  1. I compared my own measurements to the measurements Knip uses. I found I fit pretty much in a size 38, if I borrow the taille from size 40. I used my upperbust measurement as if it were my full bust measurement. I ignored my real bust measurements. Size 38 fits my frame.
  2. My breasts are not standard for size 38 and the pattern will need a Full Bust Adjustment. I will repeat the trick Lynda Maynard teaches in craftsycourse Sewing the Perfect Fit. It has brought me good things before.
  3. my back is shorter than any of the sizes of the Knip. It’s 3 cm shorter than size 38. I will hack horizontal into the pattern and move things up a bit.
  4. I probably want a longer model with less flare in the hips, I will cut the muslin generously and play with it.
  5. I want longer sleeves and probably less flarey. I’ll see to that once I’ve sorted out the armhole and the sleeve cap.
  6. Arm hole and sleeve cap. I will transfer the pattern as is onto paper but then I’m going to take a long hard look and change the armhole to a better fit. I’ve got my previous three grey blouses, I’ve got Ikatbag’s explanation and I’ve been doing a pattern drafting course for the past couple of months which has taught me a thing or two also. The sleeve (cap) will come after the armhole is sorted.
  7. closing. Still don’t do button holes. I’ve got souple zippers I can put in (no blind zipper foot for my antique foot treadle sewing machine alas) and I’ve got self fasting snaps I can put it. Either way: reserve fabric/seam allowances for this.

Now,  before I go tracing size 38 (with waist 40) on the paper I’m going to find out if this is the kind of company that puts in seam allowances into the paper pattern or wants me to put them in myself.

Knip doesn’t offer seam allowances on the paper pattern. Excellent. This way I can compare their pattern with the ones I already have very easy.

And later on I can trace the sewing lines directly onto the muslin and can cut generous seam allowances that do not have to be tidy or neat or consistent. The stitching seam is right there on the fabric, clear as day. Just follow the line.

That way I can already cut more fabric at the top of the side seam. I suspect it will have to be raised considerably for a better fitting arm hole. Modern pattern companies still think that ease of movement requests more wearing ease. It does not.

I’ll also give the front and back of the armhole more seam allowance, I suspect it has to be narrowed.

Let me think, what else…. More length at the bottom. A little bit of width at the seam allowance should I need width as well as length after doing the Maynard trick.

So let’s start.

  1. trace pattern
  2. adjust paper pattern for length (shortht) of back
  3. cut from muslin fabric with generous seam allowance
  4. sew the muslin and do the FBA Maynard style
  5. start the fit: CB at CB; shoulder seams on the shoulder seam; shoulder length appropriate/ arm hole begins where arm hole should be; side seams vertical; no dragmarks anywhere; adjust arm hole.
  6. adjust pattern, invent a sleeve, make a new muslin, do a second fitting.

1. Trace pattern:

Knipmode bloes 23 .april 2016/04

No sleeve yet since I’ll adjust it anyway.

2. adjust for height: draw a horizontal line at the waist marker and fold away 3 cm. Redraw vertical darts and side seam curve if needed. It’s just a millimeter for the dart and none for the sideseams since I have little waist accentuation as it is (as evidenced by going from size 38 at the arm pit to 40 at the waist to 38 at the bottom again).

Knipmode bloes 23 .april 2016/04

Allright.

Step 3: cut from muslin with generous seam allowances:

Knipmode bloes 23 .april 2016/04

Euhhh… I better press the muslin fabric a bit. It’s really dumb otherwise. So much inaccuracy.

Knipmode bloes 23 .april 2016/04

Now I’ll reposition the paper pieces again and check if my green lines are still accurate. Otherwise adjust them.

(I’d better press the tracing paper too I guess)

verdorie:
Untitled
Untitled
Untitled

This is an old bed sheet. It probably grew during pressing which wasn’t propper pressing but ironing. Distorting the fabric and the grain. Anyway. Redrawing the sewing lines and proceeding to the next step.

4: sew the muslin. Bust darts first, then shoulder seams, then side seams. Skip the other darts. Wear it inside out. Pin Centre Front to Centre Front.

Untitled

Now I’m ready for the FBA. First I’ll sew CF shut, it’s not too tight. (So Knip puts a lot of wearing ease in their patterns).

Untitled

Sideseam looks ok. Bust dart points up a bit. Ready for that cut Maynard style, I need a bit more room for my bust.

Untitled

Erm…. I better rewatch the craftsy course and relearn what I’m actually supposed to do. The Aha! moment didn’t happen this time…
I also feel this FBA doen not need (only) more length at the front edges but also a bit more width.

Ah, watching the course again I see I didn’t make the cut right.
n the mean time I cleaned up some of the extra wide seam allowances that I saw I didn’t need: shoulder seams, neck line and front edges.

I also already noted: sideseam needs to come up 1,5/2 fingers width; back armhole needs to extend a bit; neckline needs to come done a bit; shoulder seams need to go to the back a bit at the neck. It’s noted on the muslin, in black.

Now I make another small change to the shoulder seam first. Looking again I concluded there was no need to drop the front as much with the horizontal cut in the first place. The bust darts where already pointing to the good bits. Now they’re pointing a bit too low:

Untitled

Rewatching lesson 6 from Maynard Craftsy course tells me what I didn’t do this right at all. I should have put in navigation lines that need to stay horizontal. (wow! lesson 9 is about armholes! I’m so glad I have this course.)

I think I better cut a new muslin… and put the changes I made into a new piece of paper.

– Putting in 2,5 cm extra length in the Centre Front. Hiding it into the side bust dart so the sideseam won’t get any longer and the side dart will stay at its place. I have lengthened the dart a bit towards the apex though, now that more fabric needs to be taken out.

– Bringing the sideseam of the front pieces 1,25 cm wider at the apex line. I need a bit more width at the front but I don’t need the vertical darts to change place. Due to wearing ease that’s supposed to be in the pattern I guess I can add a bit of width at the inner side of CF too.

On the right the original pattern, what a mess:
Untitled

I don’t know what I’m doing!
On the left there’s the new paper pattern based on all the alteration. I’ve done some weird thing on the CF because I wanted extra width at the front but not at top. Wanted the grain preserved. I figured if I put in a zipper nobody is going to be surprised when it lies flat against my upperchest. As long as I don’t use a checkered fabric this might work.

On to a new muslin and that will be a new post.
Just cut one from the new paper pattern and try it on and go from there.
This time I’m working from pressed fabric and pressed paper.
Ahh, so much better:
Untitled

front pleat top

I’m inspired by this top:

and this book:

Buit Countryfair 2015

The book promotes quality fabrics and loose fitted garments.
The top Laricci Smunch sewed is pattern Burda 17/2012 #103 in a less drapey fabric than the pattern example.

I want a top that pleats as nonchalant as hers. That works with my broad shoulders and small hips. With pockets.
The book convinces me to go for a loose garment and to use some of the linens I’ve been hoarding. Reading some more about linen I found the site Fabrics-Store.com with some really encouraging tutorials. They say: just go for it! Just enjoy your linen!

Since I’m working without a pattern I’m making a muslin first, to work things out. I copied more or less the back of a longsleeve that fits comfortably.
I took that as a template for the front panel but I only used the bottom. For the top part I swiveled the piece to the right and the left so I would get enough ease in the middle for the pleat but still have matching side seams. I have not decided how I’ll do the neck.

Because the original Burda pattern has a non-desirable look in light fabrics (so frumpy!) I want to stiffen up my fabric. I cut an underlining. But I’m not sure yet how this will help in the middle of the front panel. Should I use fusing? Should I fuse the underlining to the shell fabric? Perhaps with little quilt tacks. I’ve got no idea yet.

WHAT I DID SO FAR.
Take off shirt and lie it on the fabric:
Front pleat top

Cut around it. One rough outline of a back panel:
Front pleat top

Match up the sides:
Front pleat top

For the front panel: cut the bottom the same but for the top part swivel it to the left: (picture is flipped horizontally)
Front pleat top

And swivel to the right:
Front pleat top

Match up the sides.
Now I have one back panel and one front panel:
Front pleat top

I also cut some underlining following the top part of these pieces. Now I’ll have a little cup of tea and a little think about how to proceed.

Muslin bodice V8766 Sew the Perfect Fit

This week I watched the Craftsy course Sewing the Perfect Fit, by Lynda Maynard.
On Friday I went back to the cabin, where my sewing machine is, and that afternoon I made a muslin for the bodice of Vogue 8766.
And then I hacked the muslin to pieces, just like the teacher ordered.

I started with the pattern as is. I just traced a size 12 Petite and cut it from muslin cloth. I marked the seams in pen. Staystitched in white. Basted in black.
Muslin Sewing The Perfect Fit

I did a little trick for basting the darts: in pen I marked the wrong side so I could put the two marks together more easily.
Muslin Sewing The Perfect Fit

The tip of the dart was marked on the wrong side too: I stuck a pin through it from the right side and could mark the hole in the fabric easily from the wrong side.
Muslin Sewing The Perfect Fit

I sewed the shoulder seams and the side seams together and pinned the back seam. I knew the bodice wouldn’t fit but it’s interesting to see how a Vogue pattern size 12 sits on my body:
Muslin Sewing The Perfect Fit
Oompf it’s tight. Breathing is a luxury.

Pattern sizes are made for cup size B. I’m an F. (or FF)
Still: this is my size. This is the size my frame needs, my shoulders need. It’s just that my boobs don’t fit. And that I might be shorter than size Petite.

The side shows how much my boobs don’t fit; apart from it looking very tight the side seam does not hang vertical.
Muslin Sewing The Perfect Fit

Can’t close the center back (CB) properly. Those vertical stripes are supposed to be vertical. It’s too tight and hangs below my natural waist.
Muslin Sewing The Perfect Fit

So here’s what you do to amend the pattern:
*CHOP CHOP!*
Muslin Sewing The Perfect Fit
This is a FBA, Full Bust Adjustment, Lynda Maynard style. Instant breathing opportunities.

Suddenly the side seam hangs a whole lot more vertical:
Muslin Sewing The Perfect Fit

Hey, the back closes!
Muslin Sewing The Perfect Fit
It’s not too tight anymore. But it’s way way too long. Where the horizontal creases are is where my natural waist is.

I also needed my two darts at the top of the back pieces.

Transferring the things the muslin showed onto the pattern. Shortening the bodice/ raising the waist line:
Muslin Sewing The Perfect Fit
Muslin Sewing The Perfect Fit
This requires redrawing of the darts because even if I shorten them, they still need to take in the same amount of width.
Another muslin will show me if this will work in real life or that I should swivel part of the dart around to another place.

I put in the other changes: the FBA, the little darts at the top of the back en widening the sideseams (both at the bust and at the armhole. That last one has to do with my broad back. I need to remember this if I’m going to put in sleeves, they will need an addition 2 x 0,5 cm in width)
Muslin Sewing The Perfect Fit

Tomorrow I hope to sew a new muslin, preferably in fashion fabric.
The crafty course is really worth it. All the tricks and how to look for things and how to put them into the paper pattern piece. I really like it. And I’m surprised I only needed length in my FBA, not so much width.

All this in one afternoon! And if this bodice works for me I can put it together with my go to skirt pattern and then I have a dress pattern I can use over and over again.

Gearing up for Sew the Perfect Fit, Vogue 8766. Choosing size.

It’s time to make a new shell for my new body. Most of my previous muslins and body blocks and pattern alterations are useless since I did the Atlas Profilax treatment which got rid of the curl in my body and brought my shoulders level and my hips too:

atlasprofilax result atlas profilax before after

I need a new basic pattern to work from.

In the past half year I got a good basic pattern for my skirts.  It’s based on video’s by Corinne Leigh from Craftovision and it works for me.

I’ve been making skirts from it the past few months.

But there’s still the upper body…

Some people are Pear shaped, other people are gracious Goblets. Me, I’m a Door With Two Melons in a Crocheted Grocery Bag Hanging from it.

pic by Marta Rostek

Flat, square and wearing big breasts high up. How do you do.

When I was a twisted door I did the body block measuring and tailoring and it was educational and gave me my body blocks. But ever since my frame changed I haven’t mustered up the courage to go through that whole process again.

Then the chance to purchase Craftsty course Sew the Perfect Fit came along. In it you alter a muslin to fit you, a real woman, perfect. I thought it ‘d be a good place to start anew. And it came with a free pattern: Vogue 8766:

Line Art

Princess lines, just what I want!

And go on, be brave, do sleeves!

I had to order quick and I opted for the sizes 6-12 because the patterns I bought previously were so ridiculously large.
But now I’m doubting my choice…. my measurements clearly state I should be looking at size 14 or 16. I wish I ordered the size 12-20 instead. I missed that that one had 12 in it also…

my upperbust = 36″
(bust 38″)
waist 30″
hip 38″

Vogue’s sizing charts:

in inches:

SIZE
4 6 8 10 12 14 16 18 20 22 24 26
Bust  29 1/2 30 1/2 31 1/2 32 1/2 34 36 38 40 42 44 46  48
Chest  27 1/2 28 1/2 29 1/2 30 1/2 32 34 36 38 40 42 44  46
Waist  22 23 24 25 26 1/2 28 30 32 34 37 39  41 1/2
Hip  31 1/2 32 1/2 33 1/2 34 1/2 36 38 40 42 44 46 48  50
Back Waist Length  15 1/4 15 1/2 15 3/4 16 16 1/4 16 1/2 16 3/4  17 17 1/4 17 1/2 17 3/4  18
Petite Back Waist Length 14 14 1/4 14 3/4 15 15 1/4 15 1/2 15 3/4 16 16 1/4 16 1/2 16 3/4 17

Yes. Should definitely have ordered the size 16…

Should I take action? Order the bigger size too? Bug Craftsy Customer Service to see if they can change the order? Hope that I can alter the smaller size myself?

I’ve been telling myself there’s solace in the wearing ease that is added to these patterns. The pattern state it’s “fitted” and Vogue’s wearing ease chart tells me they’ll add 3 – 4″ to any dress pattern with that word “fitted”:

Misses’ Ease Allowances
Bust Area Hip Area
Silhouette Dresses, Blouses, Shirts, Tops, Vests Jackets Coats Skirts, Pants, Shorts, Culottes
Lined or Unlined
Close Fitting 0 – 2 78 not applicable 0 – 1 7/8″
Fitted 3 – 4″ 3 3/4 – 4 1/4″ 5 1/4 – 6 3/4″ 2 – 3″
Semi-Fitted 4 1/8 – 5″ 4 3/8 – 5 3/4″ 6 7/8 – 8″ 3 1/8 – 4″
Loose Fitting 5 1/8 – 8″ 5 7/8 – 10″ 8 1/8 – 12″ 4 1/8 – 6″
Very Loose Fitting over 8″ over 10″ over 12″ over 6″

will it be enough? 4″/ 10 cm of ease is a lot! But I’ve been known to underestimate its importance, I’m forever knitting garments too tight. And knitting stretches!

Oh, now I remember that size, wearing ease and actual pattern measurements tripped me up before with Vogue.

Back in 2013 I found quite some discrepencies between stated size 12 and actual size 12 of the pattern parts in Vogue 8648:

I remember I had to take out nearly 4″ to make that dress fit me and I cut a size 16 then, based on Vogue’s sizing chart. The shoulders set appallingly wide. I was swimming in the garment. I was quite annoyed that I had to cut and throw away so much of the good fabric. Look how wide the shoulders were placed, the very part a whole dress gets its posture from:

Ridiculous. Back then I had to take out a lot of fabric and practically graded my size 16 down to a size 12:

Ah yes, now I remember.

One of my conclusions after all the fitting and altering back then even read: “Should try this is size 12 all around, no extra fabric needed at the bust. Even go down to 10. Hips at size 8.

That’s a relief! I feel better now. Added wearing ease to Vogue patterns is my friend. I’ll just wait until the pattern arrives and then we go play 🙂

“Note on V8766: all garments are cut on the crosswise grain of fabric.”
oh-oh…

… will this mean I won’t get a versatile upper body muslin out of this? For fabrics cut on the grain?

Couture Dress: cutting the lining

Marking.
Then cutting with a wide seam allowance.
Untitled

After this I’m using the pieces of the lining to cut the fashion fabric, again with wide seam allowance.

Then comes basting them together. By hand.

But first I’ve got to lay down again. Such a drag.

here’s the picture of what you see on the right side once you rip the seam after you’ve marked it:
Untitled

Couture Dress: fitting the muslin

I’ve fitted the muslin a couple of times. Made some changes in between. Fitted it again. Changed things. Fitted it some more. Laid it on a chair for a couple of weeks.
That’s a trusted way of proving sewing work, didn’t you know? It’s like good wine or bread dough, it has to have some time to make up its mind. * see foot note

The fitting is done. Now it’s time to take the muslin apart. I had one hour before reclining to the couch again (from where I’m writing you this)

Taking apart the muslin really is just a bit of work. The important thing is to carefully note all the changes you make. I used a green pen to draw the new sewing lines before taking them apart. Then, as soon as a seam was gone, I made sure to remove the stitching lines in black that were no longer relevant. They’d been replace by green pen lines in places.
If I don’t make very clear to myself which lines are the right ones I’ll go doubting further along in the process. Or worse: try and be smart(er).

Marking the new seam with green pen, before and after ripping the seam:
Untitled

Before doing anything else: ripping out the obsolete black lines:
Untitled

I am marking the new sewing lines on both sides of the fabric. I don’t know yet which side I’ll use as a template. Better be safe.
To mark a line on the right side of the fabric where you cannot see the seam I use this technique:
Untitled

I’ve made small stripes across the seam, marking the fabric on both sides of it. (I’ll now flip over the fabric and trace the seam on the wrong side, on both pieces of fabric. This is easy.)
When I rip the seam the small marks will still be there when I fold open the fabric (and a small line of puncture dots. But don’t be fooled, I’ve resewn many seams while adjusting this muslin and I’ll easily loose track of which puncture dots are the line I want to mark)
The line I want will be where the small stripes have a sharp break.

I’d show you more clearly what I mean but it’s couchy time now… perhaps I have another hour tomorrow.

footnote:

Here’s what really caused me to take so much time off sewing:

it was a lot of work fitting and changing the muslin, I was loosing my motivation a bit. So I sewed that bag and that skirt in between, that was fun!

In the mean time I’d been on holiday and had to recuperate from that for a couple of weeks. Meaning I couldn’t sit up long enough to sew or stand long enough to fit properly. I did a bit here and there, trying to leave myself good notes. But that didn’t work and every time I took up the muslin I had to fit it first again to understand what I was talking about.

Then, when I was a bit better I wore my working skirt for the first time, it was a Sunday morning. Suddenly a big dog came onto our terrain and chased our cat high up in a tree. I had to run outside and zipped up the skirt in a hurry, breaking the zipper in the process. The dog then jumped into our pond but came running when I bellowed for it. It pranced beside me to its owner, all the while streaking me with dirt and water.
Then we had to talk the cat down who was in shock. That’s when my broken, filthy skirt fell down to my ankles.

That’s when I lost the will to sew for a couple of weeks… Add another episode or two where my health took a blow and demanded some recuperation time en here we are, months along before I finally got my hands on the Couture Dress again.

But now I’m playing again! As soon as I have the chance I’ll work on it some more. I decided to make a practice dress first, without lining. Just so I have something to wear and something to play with. I’m a bit afraid to cut into the gnome fabric. First I want to get the pattern right.
I’m looking forward to playing and making a practice dress.

Gnome Couture Dress lesson 1 and 2: pattern to muslin pieces

Determined to make this dress according to the Craftsy Course The Couture Dress by Susan Khalje but also benefit from the sloper I’ve made I spend a day tinkering with the pattern pieces of Vogue 8648 and my sloper:
Untitled
I put them on top of each other, looked for clues, tried to marry their lines, inserting the ease I had chosen.

Here I try to determine how much the pieces should overlap when the midriff pieces rest on my waistline but the bossom pieces honour my apex. Those midriff pieces have to be shortened, the bust piece must come down. But what to do with the shoulder?
Also I brought in the Center Front line (CF), I made the mid piece less wide.

A scary process as I really have not much of a clue yet. However I know the sloper is correct, I know commercial patterns add way too much ease and I have Susan Khalje’s course The Couture Dress as an example and guide.

I did a lot of things to the pattern…
for one I did shorten the midriff section. The original is 9 cm high, I opted for 8 cm.
Untitled
Here you see the new line in pencil, at the top. At the bottom the waistline coincides with the seam allowance of this pattern. As I am only interested in seam lines and not in cutting lines this serves me well.

Then there’s that horizontal slice of fabric that has to come out because I’m a bit bend. You can see it noted on the sloper. It will get a place above or below this midriff section as the midriff section is an eyecatcher and should not vary in height. I’m thinking below, in the skirt pieces.

Another thing I did was because my apex is more near to my waistline than it is in the Vogue pattern. I cut the paper piece and folded it so that it matched the sloper better. Then I altered the bust piece even more:
Untitled
I let the curved line follow the princess line of my sloper. It automatically ended up being a Full Bust Adjustment.

I had so many doubts about all of this, redrawing these lines, adding ease and choosing sites to do so! In the end I watched the video lesson 2 from the Craftsy Course The Couture Dress and I was reminded that the lines do not matter that much. It will all come together when fitting the muslin.

It gave me the boldness to push through. I just drew what I thought was good. Always keeping in mind the waistline, CF, CB and grain. And letting the sloper be leading (that is: my sloper + added ease). The Vogue pattern was following.

Because I brought the pattern apex closer to the waistline (not only in the bodice side sections but also in the bodice front midsection) it brought the neckline too low so that has to rise.
Untitled
I reserved a bit of extra fabric in the muslin to determine how high I want to have it later, while fitting. How to do this and many more little and big tricks I learned from Susan Khalje, it really is a good course.

In the end I was confident enough to pin all the pieces to my muslin (again with lots of nifty tricks) and cut the muslin. (I am such a mental cheap skate. I had to actively give myself permission to “destroy” this piece of cheap muslin and just try it and see where it will lead. I’d rather not venture than run the risk of a waisted effort. Really, I’m squirrel poo.)
Untitled
 

a nice pile of pieces, ready to trace. I use waxed paper. Again, watch the course.
Untitled

Raising the back. Making notes on all the pieces before laying them aside.
Untitled

This is the skirt mid back:
Untitled
On the left you can see how I altered the lines. I put the ease (decrease) for the back mostly in the princess lines and not in the side seams. Because I have such a curved back (and not much of a waist)

On the lower right you see that I added a vent. Using this tutorial and my experience with the Wriggle Dress that had a vent too. It is very easy and looks good.

All pieces cut, traced and noted it was time to put away the paper.
Untitled
Tracing paper and pattern paper are now snug in their envelopes again. Usually I run away mid project and forget to tidy up. This time I am regarding tidying up as part of the process. And it feels good!